Chemical Earthing Material

Product Details:

A typical Lightning Arrester, also called Surge Arrester, comprises a high voltage terminal made of Copper of Aluminum mounted on top of a building. It is electrically connected to the ground terminal through a wire to protect the building in the event of lightning. If lightning strikes the building, it will preferentially strike the lightning rod and be conducted harmlessly to ground through the wire, instead of passing through the building where it could start a fire or cause electrocution. Lightning arresters can be commonly seen mounted on tall buildings, monuments, towers, water tanks etc.

1. A very important point worth noting in this regard is that a lightning arrester or lightning protection system as a rule never stops the action and effects of lightning. However, it provides ample protection and insurance against the damage to the building and electrical devices. Our lightning arresters are a guarantee to this. Earthing Pipes :
   Also called Pipe Electrodes, these are used widely in power transmission applications. Our hot dip GI and Copper earthing pipes with funnel are robust in construction, easy to install and durable in performance provide good earthing. These are fabricated using premium quality raw material and are available in sizes like16, 20,25mm dia rod, 46mm Dia, 57mm dia , 75mm dia and 88mm dia pipes, in lengths varyng from 1 meter to 3 meters or as desired. Our pipe electrodes are accurate in dimension, corrosion resistant and high in tensile strength.
2. Lightning protection systems.
3. Prevention of accidents caused by static charge and stray currents.
4. Protection of central communications, electronics, and AC power systems.
5. Meeting grounding safety requirements for electrical substations.
6. Ground fault neutralization.
7. Safeguarding critical instrumentation and process control equipment.

HOW TO INSTALL GEL EARTHING ELECTRODE:-

• It is recommended to install in clay or highly humid soil.
• Make a pit preferably of 6-8 inches dia upto appropriate length of Gel Earthing Electrode.
• Put them in vertical positions in the pit with the connection terminal on the top.
• It is recommended to fill back-fill-compound surrounding of Gel Earthing Electrode mixed with proper water pouring simultaneously.
• Normally 2 bags of back-fill-compound is recommended for our Gel Earthing Electrode but in some case i.e., Rocky Area, bag can be varies.
• Make joint with suitable copper wire/strip or G.I. wire/strips carry for earthing from your equipment etc. upto the earthing terminals provide on the top of the Gel Earthing Electrode. Beware, don''''t hash on the while handling and installation, do not use hammer etc.
• Put the chamber with the cover over the Gel Earthing Electrode & even petroleum jellyon the exposed part of Gel Earthing Electrode i.e., terminal.

Do proper water pouring upto 6-7 days after Installation

Additional Information:

• Item Code: EarthingElectrode
• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: Delhi
• Production Capacity: 1000
• Delivery Time: 30 Days
• Packaging Details: Packages in wooden crates and cost included in product cost

Product Details:

We are engaged in offering GI Earthing Electrode, which is widely available at cost-effective range. Our experts thoroughly test these products on certain quality-testing parameters that we instilled in our infrastructure.

These products have gained encored appreciation among our client base owing to certain features listed below:

 

• High tensile strength.
• Dimensional accuracy.
• Corrosion resistance. Copper Earth/ Earthing Electrodes which is manufactured using the most premium quality circular rods of low carbon steel for a high tensile strength and durability. We adhere to the specifications of Underwriters Laboratories (UL) 467-2007 and the copper earthing electrode is accordingly molecularly bonded with the exterior of the rod. It is highly effective and widely appreciated for its functionality among our clients.

   

  Details:

   

  · UL

  · Diameter: Minimum 20.0 mm

  · Length: Minimum 1,2,3 meters

  · Copper bonding thickness: 250,500,750,1000 microns,

  · Maintenance free

  · High strength rod

  · Corrosion resistant

  · Low resistance path to earth

  · Cost
• SELECTION OF EARTH SYSTEM
• S.N. Installations/ Current Capacity
• IR Value Required
• Soil Type/ Resistivity Earth System
• 1. House hold earthing/ 3kA
• 8 ohm Normal Soil/ upto 50 ohm-mtr Single Electrode Sandy Soil/ between 50 to 2000 ohm-mtr Single Electrode Rocky Soil/ More than 2000 ohm-mtr Multiple Electrodes
• 2. Commercial premises Office buildings/ 5kA
• 2 ohm Normal Soil/ upto 50 ohm-mtr Single Electrode Sandy Soil/ upto 2000 ohm-mtr Multiple Electrodes Rocky Soil/ More than 2000 ohm-mtr Multiple Electrodes
• 3 Transformers, substation earthing, LT line equipment/ 15kA
• 1 - 2 ohm Normal Soil/ upto 50 ohm-mtr Single Electrode Sandy Soil/ upto 2000 ohm-mtr Multiple Electrodes Rocky Soil/ More than 2000 ohm-mtr Multiple Electrodes
• 4 Transformers, substation earthing, HT line equipment/ 40kA
• less than 1 ohm
• Normal Soil/ upto 50 ohm-mtr Single Electrode Sandy Soil/ upto 2000 ohm-mtr Multiple Electrodes Rocky Soil/ More than 2000 ohm-mtr Multiple Electrodes
• 5 Lightning arresters, extra high current applications etc./ 50kA
• less than 1 ohm
• Normal Soil/ upto 50 ohm-mtr Single Electrode Sandy Soil/ upto 2000 ohm-mtr Multiple Electrodes Rocky Soil/ More than 2000 ohm-mtr Multiple Electrodes
• 6 PRS, UTS, RTUs,FOIS, COIS, ATMs and data processing centre etc./5KA
• less than 0.5 ohm
• Normal Soil/ upto 50 ohm-mtr Single Electrode Sandy Soil/ upto 2000 ohm-mtr Multiple Electrodes Rocky Soil/ More than 2000 ohm-mtr Multiple Electrodes Note :- Single/multiple electrode in above earth system shall be either rod earth electrode or concentric pipe earth electrode as per clause 8.1.

Additional Information:

• Item Code: GelEarthingElectrode
• Port of Dispatch: Delhi
• Production Capacity: 1000
• Delivery Time: 30 Days
• Packaging Details: Packages in wooden crates and cost is included in the product cost