Call 08048986190 83% Response Rate

our range

Post Insulator

The Post Insulator has been specifically designed so as to withstand the demands made upon them by extremes in climatic conditions and weather fluctuations. The Post Insulator flanges are sharp and narrow which results in shape and creepage distance most suitable for countering problems of pollution. Even strong arcs fail to break the cast resin Post Insulators. Scars in the surface caused by flash-over can be easily made good by smoothing and cleaning the marks and rubbing a thin layer of silicone paste into the surface. This treatment does not decrease the flashover strength of the insulator. The cast resin Post Insulators also have a high resistance to chemicals.

The Post Insulators can be used in areas where the atmosphere includes large quantities of corrosive gasses such as sulphuric and nitrogenous compounds. Indoor Post Insulators can be installed in any chosen position. The operating position of outdoor Post Insulators can vary from vertical to horizontal. Aluminium compound busbar clamps are used for fixing busbars to Post Insulators. The dimensions and position of the busbar stack and the type of insulator used, determine the type of busbar clamp. The dimensions of the busbars have been calculated so that if the height of the busbar stack does not exceed the width of the busbars, they will withstand greater mechanical strain than the corresponding support Post Insulators.

  • 11kV 5kN Polymer Post Insulator
  • 11kV 5kN Polymer Post Insulator
  • 11kV 5kN Polymer Post Insulator
  • 11kV 5kN Polymer Post Insulator
  • 11kV 5kN Polymer Post Insulator
  • 11kV 5kN Polymer Post Insulator
11kV 5kN Polymer Post Insulator

11kV 5kN Polymer Post Insulator

Rs 650  / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Product Brochure

Voltage33 kV
MaterialComposite Polymer
ColorGrey
Model Name/NumberREE-PL01-24F-11
Rated Voltage11 kV
BrandRashtriya Electrical
Tensile Strength5kN
Spacing320 mm
Usage/ApplicationDistribution Lines
Diameter105mm
I Deal InNew Only
Creep Age Distance320mm
Working Voltage11 kV
Number of Shed3
Applicable SpecificationIEC 61109, IEC 61952
Flashover Voltage Critical Impulse Negative80 kvp
Withstand Voltage Impulse Negative75 kvp
Cantilever Strength5 kN
Withstand Voltage Impulse Positive75 kvp
Withstand Voltage Power Frequency Dry55 kv
Flashover Voltage Low Frequency Wet40 kv
Net Weight Approx1.5 kg
Size252mm X 105mm
Flashover Voltage Low Frequency Dry65 kv
Flashover Voltage Critical Impulse Positive80 kvp
Withstand Voltage Power Frequency Wet35 kv
Country of OriginMade in India

Polymer Post Insulator also called Composite Polymer Post, Silicone Rubber Post Insulator Insulator or Support Insulator.
As per IEC:61109 and IEC:61952 under the category of high-voltage electrical insulators.
Suitable for 11kV overhead electrical/power/energy/voltage distribution/transmission lines/systems, wherever electrical insulation and support requirement is needed and industrial and other electrical equipments like transformers.
Make: Rashtriya Electrical 
We are manufacturers based in India. We are supplying all across India, Nepal, Bhutan, Bangladesh, Sri Lanka, Myanmar, Middle Eastern countries and Africa.



Additional Information:

  • Production Capacity: 1000 piece/day
  • Delivery Time: Ready Stock
  • Packaging Details: 50 pieces per gunny bag

View Complete details

get quote request a call back
  • 33kV 10kN Polymer Line Post Insulators 1100mm Creepage Distance
  • 33kV 10kN Polymer Line Post Insulators 1100mm Creepage Distance
  • 33kV 10kN Polymer Line Post Insulators 1100mm Creepage Distance
  • 33kV 10kN Polymer Line Post Insulators 1100mm Creepage Distance
  • 33kV 10kN Polymer Line Post Insulators 1100mm Creepage Distance
  • 33kV 10kN Polymer Line Post Insulators 1100mm Creepage Distance
33kV 10kN Polymer Line Post Insulators 1100mm Creepage Distance

33kV 10kN Polymer Line Post Insulators 1100mm Creepage Distance

Rs 1,500  / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Brochure

Voltage33 kV
ColorGrey
BrandRashtriya Electrical & Engg. Corp.
Size33kv
Tensile Strength10kN
MaterialPolymer
Usage/ApplicationElectrical Distribution Line
I Deal InNew Only
Working Voltage33 kV
Country of OriginMade in India

Polymer Line Post Insulator also called Composite Polymer Line Post, Silicone Rubber Line Post Insulator Insulator or Support Insulator.
As per IEC:61109 and IEC:61952 under the category of high-voltage electrical insulators.
Suitable for 33kV overhead electrical/power/energy/voltage distribution/transmission lines/systems, wherever electrical insulation and support requirement is needed and industrial and other electrical equipments like transformers.
Make: Rashtriya Electrical 
We are manufacturers based in India. We are supplying all across India, Nepal, Bhutan, Bangladesh, Sri Lanka, Myanmar, Middle Eastern countries and Africa.



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit)
  • Production Capacity: 500 Pieces/ Day
  • Delivery Time: 10 Days
  • Packaging Details: Packed in Corrugated Boxes

View Complete details

get quote request a call back
  • Line Post Insulator 33kV
  • Line Post Insulator 33kV
  • Line Post Insulator 33kV
  • Line Post Insulator 33kV
  • Line Post Insulator 33kV
  • Line Post Insulator 33kV
  • Line Post Insulator 33kV
  • Line Post Insulator 33kV
  • Line Post Insulator 33kV
Line Post Insulator 33kV

Line Post Insulator 33kV

Rs 1,650  / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Brochure

Voltage33 kV
ColorGrey
BrandRashtriya Electrical & Engg. Corp.
Size170mm X 376mm
MaterialPolymer
Usage/ApplicationPower Distribution
Capacity33 kV
Tensile Strength10 kN
Applicable SpecificationIEC 61109
Net Weight1.8 kg
Negative Critical Impulse Flashover Voltage220 kvp
Creepage Distance900mm
Product Code as per CatalogueREE- PL01- 42F- 33
Number of Shed9
Positive Critical Impulse Flashover Voltage200 kvp
Dry Low Frequency Flashover Voltage90 kV
Wet Low Frequency Flashover Voltage50 kV

Our 33kV Line Post Insulator Polymeric Type 900mm CD is made using cutting edge technology operated by highly skilled technocrats. Our 33kV Line Post Insulator is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients. We conduct stringent quality checks in our unit at several stages of manufacturing of the 33kV Line Post Insulator before the final dispatch. Apart from that, Rashtriya Electrical & Engg. Corp. makes sure that it upgrades its technological configurations in accordance with the industrial innovations. Further, the exhaustive research in the field of Line Post Insulator enables the company to understand the market insights.

 

We are able to manufacture Line Post Insulator of different kV and CD as per your requirements.



Additional Information:

  • Production Capacity: 500 piece/day
  • Delivery Time: Ready Stock
  • Packaging Details: Corrugated Boxes

View Complete details

get quote request a call back
  • 66kV Polymer Post Insulator
  • 66kV Polymer Post Insulator
  • 66kV Polymer Post Insulator
  • 66kV Polymer Post Insulator
  • 66kV Polymer Post Insulator
  • 66kV Polymer Post Insulator
66kV Polymer Post Insulator

66kV Polymer Post Insulator

Rs 6,500  / PieceGet Best Price

Product Brochure

MaterialComposite Polymer
Rated Voltage33kV
Voltage33kV
BrandRashtriya
Tensile Strength10kN
Capacity33kV
Spacing900mm
Usage/ApplicationDistribution Line
I Deal InNew Only
Diameter125mm
Creep Age Distance900mm
Working Voltage33kV
Country of OriginMade in India

Polymer Post Insulator also called Composite Polymer Post, Silicone Rubber Post Insulator Insulator or Support Insulator.
As per IEC:61109 and IEC:61952 under the category of high-voltage electrical insulators.
Suitable for 33kV overhead electrical/power/energy/voltage distribution/transmission lines/systems, wherever electrical insulation and support requirement is needed and industrial and other electrical equipments like transformers.
Make: Rashtriya Electrical 
We are manufacturers based in India. We are supplying all across India, Nepal, Bhutan, Bangladesh, Sri Lanka, Myanmar, Middle Eastern countries and Africa.



Additional Information:

  • Production Capacity: 100 piece/day
  • Delivery Time: Ready Stock
  • Packaging Details: 3 Pieces per Corrugated Box

View Complete details

get quote request a call back
  • 66kV Polymer Line Post Insulator
  • 66kV Polymer Line Post Insulator
  • 66kV Polymer Line Post Insulator
  • 66kV Polymer Line Post Insulator
  • 66kV Polymer Line Post Insulator
  • 66kV Polymer Line Post Insulator
  • 66kV Polymer Line Post Insulator
66kV Polymer Line Post Insulator

66kV Polymer Line Post Insulator

Rs 6,500  / PieceGet Best Price

Minimum Order Quantity: 1000 Piece

Product Brochure

ColorGrey
BrandRashtriya Electrical & Engg. Corp.
Size33kv
Power2000 Amp
MaterialPolymer
Usage/ApplicationPower Distribution

Polymer Line Post Insulator also called Composite Polymer Line Post, Silicone Rubber Line Post Insulator Insulator or Support Insulator.
As per IEC:61109 and IEC:61952 under the category of high-voltage electrical insulators.
Suitable for 33kV overhead electrical/power/energy/voltage distribution/transmission lines/systems, wherever electrical insulation and support requirement is needed and industrial and other electrical equipments like transformers.
Make: Rashtriya Electrical 
We are manufacturers based in India. We are supplying all across India, Nepal, Bhutan, Bangladesh, Sri Lanka, Myanmar, Middle Eastern countries and Africa.



Additional Information:

  • Port of Dispatch: Delhi
  • Production Capacity: 5000
  • Delivery Time: 30 Days
  • Packaging Details: Packed in Wooden Crates

View Complete details

get quote request a call back
  • Post Insulator 66kV
  • Post Insulator 66kV
  • Post Insulator 66kV
  • Post Insulator 66kV
  • Post Insulator 66kV
  • Post Insulator 66kV
  • Post Insulator 66kV
  • Post Insulator 66kV
  • Post Insulator 66kV
  • Post Insulator 66kV
Post Insulator 66kV

Post Insulator 66kV

Rs 4,500  / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Brochure

Voltage66 kV
BrandRashtriya Electrical & Engg. Corp
SizePCD 76mm
MaterialPolymer
Usage/ApplicationPower Distribution
Capacity66kV

Our 66kV Post Insulator Polymeric Type is made using cutting edge technology operated by highly skilled technocrats. Our 66kV Post Insulator is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients. We conduct stringent quality checks in our unit at several stages of manufacturing of the 66kV Post Insulator before the final dispatch. Apart from that, Rashtriya Electrical & Engg. Corp. makes sure that it upgrades its technological configurations in accordance with the industrial innovations. Further, the exhaustive research in the field of Post Insulator enables the company to understand the market insights.

We are able to manufacture Post Insulator of different kV and CD as per your requirements.

 



Additional Information:

  • Production Capacity: 100 piece/day
  • Delivery Time: Ready Stock
  • Packaging Details: Corrugated Boxes

View Complete details

get quote request a call back
  • 33kV 10kN Polymer Post Insulator
  • 33kV 10kN Polymer Post Insulator
  • 33kV 10kN Polymer Post Insulator
  • 33kV 10kN Polymer Post Insulator
  • 33kV 10kN Polymer Post Insulator
  • 33kV 10kN Polymer Post Insulator
  • 33kV 10kN Polymer Post Insulator
33kV 10kN Polymer Post Insulator

33kV 10kN Polymer Post Insulator

Rs 1,000  / PieceGet Best Price

Minimum Order Quantity: 1000 Piece

Product Brochure

Voltage33 kV
ColorGrey
BrandRashtriya Electrical & Engg Corp
Size33KV
MaterialPolymer
Usage/ApplicationPower Distribution
I Deal InNew Only
Tensile Strength10kN
Country of OriginMade in India
Polymer Post Insulator also called Composite Polymer Post, Silicone Rubber Post Insulator Insulator or Support Insulator.
As per IEC:61109 and IEC:61952 under the category of high-voltage electrical insulators.
Suitable for 33kV overhead electrical/power/energy/voltage distribution/transmission lines/systems, wherever electrical insulation and support requirement is needed and industrial and other electrical equipments like transformers.
Make: Rashtriya Electrical 
We are manufacturers based in India. We are supplying all across India, Nepal, Bhutan, Bangladesh, Sri Lanka, Myanmar, Middle Eastern countries and Africa.

Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit)
  • Port of Dispatch: Delhi
  • Production Capacity: 10000
  • Delivery Time: 30 Days
  • Packaging Details: Packaged In Corrugated Boxes

View Complete details

get quote request a call back
  • Post Insulator 33Kv
  • Post Insulator 33Kv
  • Post Insulator 33Kv
  • Post Insulator 33Kv
  • Post Insulator 33Kv
  • Post Insulator 33Kv
  • Post Insulator 33Kv
  • Post Insulator 33Kv
  • Post Insulator 33Kv
  • Post Insulator 33Kv
  • Post Insulator 33Kv
Post Insulator 33Kv

Post Insulator 33Kv

Rs 1,000  / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Voltage33 kV
BrandRashtriya Electrical & Engg. Corp.
Tensile Strength6 kN
MaterialPolymer insulator. silicone insulator
Usage/ApplicationPower Distribution
Working Voltage33 kV

Our 33kV Post Insulator Polymeric Type 900mm CD 6kN Cantilever Tested quality is made using cutting edge technology operated by highly skilled technocrats. Our 33kV Post Insulator is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients. We conduct stringent quality checks in our unit at several stages of manufacturing of the 33kV Post Insulator before the final dispatch. Apart from that, Rashtriya Electrical & Engg. Corp. makes sure that it upgrades its technological configurations in accordance with the industrial innovations. Further, the exhaustive research in the field of Post Insulator enables the company to understand the market insights.

We are able to manufacture Post Insulator of different kV and CD as per your requirements.

Additional Information:

  • Production Capacity: 300 Piece/Day
  • Delivery Time: Ready Stock
  • Packaging Details: Corrugated Boxes

View Complete details

get quote request a call back
  • Polymer Bus Post Insulator
  • Polymer Bus Post Insulator
  • Polymer Bus Post Insulator
  • Polymer Bus Post Insulator
  • Polymer Bus Post Insulator
  • Polymer Bus Post Insulator
  • Polymer Bus Post Insulator
  • Polymer Bus Post Insulator
Polymer Bus Post Insulator

Polymer Bus Post Insulator

Rs 13,500  / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Brochure

Working Voltage132 kV
BrandRashtriya Electrical & Engg. Corp.
Voltage132 kV
Size132 kV
Colorgrey
I Deal InNew Only
Usage/ApplicationPower Distribution

Solid core electrical Line Post Insulators can be used as support for conductors on cross-arms of transmission and distribution line poles. These insulators are recommended for polluted zones and areas prone to vandal damages.

Even if the insulator shed is damaged, there will be little decrease in flash over voltage and power supply will not be disturbed. The damaged insulator can be left in service and replaced conveniently. No change in cross arm is necessary, if pin type insulators are replaced by line post insulators during maintenance.

View Complete details

get quote request a call back
  • Post Insulator
  • Post Insulator
  • Post Insulator
  • Post Insulator
  • Post Insulator
  • Post Insulator
  • Post Insulator
  • Post Insulator
  • Post Insulator
  • Post Insulator
  • Post Insulator
  • Post Insulator
Post Insulator

Post Insulator

Rs 1,350  / PieceGet Best Price
Working Voltage33 kV
Rated Voltage33 kV
Creep Age Distance900mm
Diameter150mm
Usage/ApplicationDistribution Lines
Spacing400
I Deal InNew Only
BrandRashtriya

Our 33kV 10kN Polymer Post Insulator is made using cutting edge technology operated by highly skilled technocrats. Our 33kV 10kN Polymer Post Insulator is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients. We conduct stringent quality checks in our unit at several stages of manufacturing of the 33kV 10kN Polymer Post Insulator before the final dispatch. Apart from that, Rashtriya Electrical & Engg. Corp. makes sure that it upgrades its technological configurations in accordance with the industrial innovations. Further, the exhaustive research in the field of Polymer Post Insulators enables the company to understand the market insights.



Additional Information:

  • Production Capacity: 200 piece/day
  • Delivery Time: Ready Stock
  • Packaging Details: 15 pieces each in gunny bags

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES